Home / public / ATX LED Products / ML - CMK - 3CC - 1F

ML - CMK - 3CC - 1F


 

ML-CMK-3CC-1F





Data sheet is here:      https://mehr.lighting/pdf/ML-CMK-3CC-1F.pdf

Detailed operation of the buttons:

Defined outputs:


Output
Function
Max Wattage
+51v
Common Anode
 100W
2  -  300 mA dimming
Nightlight, step light, etc
 15w
3  -  660 mA dimming
Cool White or Fixed
 33w
4 -   660 mA dimming
Warm White or Fixed
 33w
5 -  On/Off 1 Amp
Fan, simple bulb
 50w


Notes:    A nightlight will have a 6v fixture - so 2 watts.    A stairlight will have 14 fixtures with 3v / 1 watt each, two Coachlights could be 51v with 7.5wKitchen Isand could be




Pairing Button:



The Pairing sequence is as follows


a)  Long Press - fast blink resets all pairing and WiFi

b)  short press - turns all lights on/off

c)  Medium Press - slow blink - enters pairing mode






Pairing Mode Function:


Switches can be 86x86 Single, Dual or Triple wide, down only or up/down

After Pairing Mode starts, the first button pressed will control the Tunable White outputs

a)   If single wide,  Up/Down or US style  Up/Down

       UP is On/Dimming
       Down is Off/CCT

b)    If Double wide 86x86,    Up/Down

       Left UP is On/Dimming
       Left Down is Off/CCT
       Right UP is Nightlight ON / Dim up
       Right DOWN is Nightlight OFF / Dim Down

c)    if Single Wide,  Down only

        Button is On/Off toggle, and press and hold to dim, outputs Cool and Warm are at the same brightness ( Fixed mode )


if a) or b),  if a 2nd button is pressed, it can only be a single wide, it will control the Fan.   The fan is On with 10 minute timer, or off.

if c), a 2nd button pressed it can only be a single wide, and it controls the Nightlight - On/Off/Dimming, if c) and a 3rd button is pressed, then that controls the Fan ON timer/Off

----------------------------------------------------------------------


Pairing Mode Function Many to one ( 3-Way ):


If the Pairing button is pressed medium, and some switches are already paired, then additional switches can be added, to allow multiple remotes to control the same outputs as above

















     RSS of this page