P023R11 strip


The Strip solution set has three distinctly different options.

CCT controlled with extreme efficiency (a) and midrange (b) requiring soldering and planning

modular, plug and play, and fixed CCT ( c )



A) series 660mA 

This option is designed for the highest possible efficiency and the ideal, perfect dimming and color tuning. However, it requires clear planning, and the maximum length of the strip is limited to about 14 feet. The wiring method is the same as our ceiling downlights so it’s a series wiring with two wires between each endpoint, that means two wires on one end of the strip and two wires on the other end of each strip.  An  AL-WS-DR2 is  used with the 660mA models and a AL-Dr1500 is used with the 1320 mA models. 

B) parallel CVCL 'Controlled Voltage - Current Limited'

Our strips that are designed for parallel wiring are also driven by a current limited source. For short runs below 28 w,  the AL-WS-DR2 is best, it perfectly operates at the highest lm/watt point in the vi curve - invisibly hunting the ML/WR - Max lm / w Ratio .  The AL-DR1500 handles loads above 75 w at ML/WR.  These loads are constant Lumens, the delivered lumen are the same, spread evenly across what ever length you connect.  There is no ‘overload’

Between 38 and 75 watts, the AL-DR1500 or similar needs to have its max manually adjusted if the highest efficiency is demanded, otherwise it works fine but will have a 25% reduction in efficiency.

C) Modular with built in connectors and easy to deploy






ATX Strip Lights  



     Flexible Strip lights with 7.5 inch cut sections

Our AL-SL-42v1.5w-27/5000K parallel wired strips
are available in 16.4 ft ( 5 m ) lengths.


  • 1.5 w/ft option

  • 2.5 w/ft option

  • Flexible with 3M self stick tape, 11 mm wide

  • UL Listed E345867

  • 4 wires ( C+, C-, W+ W- ) tunable white

  • 3 fixed color options ( same SKU) 2700, 3850, 5000K

  • can be used with DR2 for 16.4 ft tunable, 33 ft fixed

  • can be used with SRP-2309 for up to 75 Watts

  • can be cut each 7.5 inches.

  • Includes one soldered set of wires per 16.4 ft strip

  • Soldering required - no off the shelf connectors are provided



 IMG_8050


IMG_8050d
Modular ATX Strip Switches


Switch Controls with Pigtails



IMG_9319

Button Control
AL-SL-BS-01


IMG_9321


Hand Wave Control
AL-SL-HW-01



IMG_9322



Pigtail without controls
AL-SL-SS-01


Pigtail Male / Female  extenders


Modular ATX Strip Lights


3, 10, 20, 40 inch sections

AL-H050-07W-30K-51v    ( 20 inch )
AL-H026-03.5W-30K-51v ( 10 inch )

Image1


IMG_9318



Male / Female ends

IMG_9320

IMG_9323






Series 660 mA and 1320 mA Strip light options for advanced users only

Model
 Width



 Watts / Foot
 Loss
CCT
option


 Cut length
 Max Length
with DR2

30 watts
 Max Length
SRP-2309
60 watts
P023S6-7
 12 mm
 4
 0%
 √ 7 inches
 9 ft
P023R6-9
 12 mm 3
 0% √ 9 inches
 12 ft
P023R6-12
 12 mm 2
 0% √ 12 inches
 15 ft

P023R11-18

 12 mm 4
 0% √
18 inches

  7.5 ft
12 mm 8
 0% √
7.5 ft
P023R6
 12 mm 8
 8% √  9 inches
 4 ft
AL-Strip-48v1.5w-27/5000K 10 mm 1.5
 8% √  
9 inches

 20 ft
10 mm 1.5
 8%
 v
50 ft

24v strip

 8 mm
 1.5 to 3
30%

4 inches

 10 to 20 ft
8 mm
 1.5 to 3 30%

50 ft


IMG_0993

Top:  12 inch  2 watt strip - note that CW and WW have + on opposite ends.
Next  7 inch and 9 inch strip un separated   2 watts each
Next  two 7 inch strips watts each
Bottom - 18 inch, 6 or 12 watt strip - note that + for both CW and WW are on the same end.
Not shown:   12 watt 48v CV strip ( 18 inches )  
Not shown:    48v CV strip, 24v CV strips


   4 or 8 w/ft Strip Lights using P023S11 CCR / DCC strips   ( P023S4 )



IMG_4940
example with 18 inches between junctions mounted for open frame cove applications


The High Output high density strip light from ATX LED is available as DIY with 18 inches, or assembled with these sizes. 

For 4 watts per ft, set the current to 720 mA.  For 8 watts per ft use1440 mA.
Available as tunable white or fixed. 
Choose open frame ( for cove lighting ) or closed with diffuser ( for under cabinet )  -
photo is open frame - this offers the best cooling ( use a vacuum to remove dust )


Dimming is strongly recommended.

Length Watts with CCT Watts Fixed
 Watts with CCT
 CCT/CRI
 Part Number
 
 AL-WS-DR2
 AL-WS-DR2
2 channels in use
 SRP-2309-75CCT
<- Driver
19"
 6
 6
 13
 YES / 90 P023R11-19
37"
 12
 12
 26
 YES / 90 P023R11-37
55"
 18
 18
 39
 YES / 90 P023R11-55
73"
 24
 24
 52
 YES / 90 P023R11-73
92"
 30
 30
 65
 YES / 90 P023R11-92
110"
36
YES / 90 P023R11-110
128"
42
YES / 90 P023R11-128
146"
48
YES / 90 P023R11-146
164"
54
YES / 90 P023R11-164
192"
60
YES / 90 P023R11-192



8 w/ft Strip Lights using P023R11 CV strips - optional driver

The High Output strip light from ATX LED is available in these sizes.  The current is 160 mA per ft and they are fixed color.
Dimming is strongly recommended due to the brightness of these strips, but you can power these from a simple On/Off switch, no arcing to damage the switch,
up to 12 ft per NEC 2017 code limits

If using a AL-WS-DR1 or DR2 driver, above 4 ft, the watts for the entire strip is limited to 36 watts - therefore a 16 ft strip will take 36 watts max, this is quite bright.

Length Watts Fixed
 Watts Fixed
 CCT/CRI
 Part Number
 
 AL-WS-DR1
 AL-WS-DR2
2 channels in use
<- Driver
19"
 12
 24
 YES / 90 P023R11-cv-19
37"
 24
 48
 YES / 90 P023R11-cv-37
55"
 36
 72
 YES / 90 P023R11-cv-55
73"
 36
 72
 YES / 90 P023R11-cv-73
92"
 36
 72
 YES / 90 P023R11-cv-92
110"
 36
 72
 YES / 90 P023R11-cv-110
128"
 36
 72
 YES / 90 P023R11-cv-128
146"
 36
 72
 YES / 90 P023R11-cv-146
164"
 36
 72
 YES / 90 P023R11-cv-164
192"
 36
 72
 YES / 90 P023R11-cv-192



2 w / strip  P023S2   CCR / DCC

in 7, 9 and 12 inch lengths  ( 3.4 w, 2.7 w and 2 w / ft )


Top = 7+9 inches as a breakaway 16 inch strip
bottom = 12 inches


IMG_4941
example with 7+9 inches ( 16 total )  mounted for open frame cove applications

Use to build almost any length from 7 inches to 180 inches ( 15 ft )
CCT              - 15 ft per DR2
Fixed   - 30 ft per AL-WS-DR2   

combine different lengths into the size needed
operate at 2700, 3850, 5000 or tunable white

minimum total per driver is 14 inches ( 2 strips ) - and can be split into different physical locations
for example - 3 strips with 12 inches each could be in 3 different sections

X is one strip, XX is two strips, XXX is 3 strips

Length
inches
 P023S2-7
 P023S2-9 P023S2-12
7
 X

9
X
10


12

X
13


14
 XX

15


16
 X X
17


18
XX
19


20


21
 XXX

22


23
 XX X
24

XX
25
 X XX
26
 XX
X
27
XXX
28
 X X X
29


30
XX X
31
 X
XX
32
 XX XX
33
X XX
34
 X XXX
35
 XX X X
36

XXX
.37
 X XX X
38
 XX
XX
39
 XXX XX
40
 X X XX
41
 XX XXX


48 volt CV CCT strips  30 or 60 watts per DR2
model GL-24-LJ01A


These tunable white strips can be of any length - the total wattage will be 30 watts per DR2 in CCT mode, or 60 watts in Fixed color.   If for example, you have 30 ft of this - the watts per ft is 1 watt per ft.
24 volt CV resistive strips and lights

Fixed color temperature with DALI control


reactive bulbs - see next section




under 15 watts per DR1
under 30 watts per DR2
 15 - 30 watts per DR1
30 - 60 watts per DR2		 50 to 75 watts
AWG 18
 75 to 100 watts
AL-WS-DR1-24v
 wire in parallel


AL-WS-DR1
1/2 the devices in parallel
2 sets of parallel devices in series

AL-WS-DR2
 wire in parallel on each side
 1/2 the devices in parallel
2 sets of parallel devices in series

SRP-2305-75

1/2 the devices in parallel
2 sets of parallel devices in series
ELG-100-24DA


all in parallel, awg14 wire
ELG-100-48DA


all in parallel, awg18 wire
SRP-2309-200CVT ( RBGW)


all in parallel, awg14 wire





12/24 volt AC/DC reactive bulbs

Fixed color temperature with DALI control




under 12 watts, 12v mode
no dimming
 under 60 watts, 12v mode
no dimming
 under 100 Watts, 24v mode
no dimming
AL-WS-DR2 in 12v DC mode
 wire in parallel
AWG 18 wire

EV-12v-DALI-60D
wire in parallel
AWG14 wire
ELG-100-24DA

wire in parallel
awg 18



 



    		 RSS of this page