| | | |
 Uploading ....
| Power Management
Watt's My Usage?
Detailed power usage statistics for each AL-WS-DR2 on the DALI bus
kWh used, average dimming level, on time, uptime, per switch
Device Topology
- see below
Lighting System Power
Reports the availablity of the different power supplies attached.
Note: With PSE, input A is the binary encoded count of the attached power supplies. See AL--PSE-4 data sheet.
Lighting System Failover Rule
Use this to set the % cutback of max brightness if an outage occurs
Internal DALI Supply options - use this to increase or decrease the current on the DALI bus - see "Dali Power" |
|
Device Topology
DR2G Topology
Available with DR2 devices starting in 2023. Turns all lights off, then turns each one on to measure the load, the distance and the relationship with other DR2
Displays the Home Run layout and wattage per home run.
Load Topology
Scans all DR2 devices and displays the type of attached LED, and if there is a fan, and the wattage needed.
PSE-4D Topology
Scans all PSE-4D devices and displays the loads attached to each output.
|
| |
|
|
| | | |
|
