ZWD Triggers
Triggers are used in ZWD to allow actions from a Z-Wave or DALI device to create controls to other DALI devices
- When a DALI Address receives a turns on command ( ARC = > 0)
- When a DALI Address receives a turn off command ( ARC Level == 0)
- When a Z-Wave event occurs
- other actions to be added as requested
- selects the names for the short addresses known on the DALI bus
- set address ( light ) to level
- brighten
- dim
- set Color
- test for current brightness, proceed if true
- set minimum or maximum levels
- recall a scene
- pause for XX seconds
- All
- Individual lights
- Groups
- virtual devices
- Click on the "trigger now" button to test
Delete if no longer needed- Expand the new trigger
- give it a name ( Test 1)
- select from the drop down box the trigger action
- Select from the drop down box the destination device for the trigger action
- Create one or many actions - use the + button
- Select the destination address
- Test
| 
|
Uploading ....