Home / public / ... / AL - DALI - Pi / ZWD Control Suite / WiFi Rooms

WiFi Rooms



Unified Control of WiFi ( Wiz ) Bulbs and more


Via DMX or Schedule / Macros

WizRooms


This page is used to discover, manage and DMX enable 

WiFi bulbs from Wiz


Once connected to your WLAN network, any bulbs

will be discovered and can be controlled
  1. Purchase one or more products:
     
    * Amazon link

    * ATX LED AL-WS-DR2W

    * from this page,  link:      Wiz Bulbs @ PureEdge



  2. Use the Wiz app to connect the bulbs / devices to the project via WiFi



  3. Connect the ATX Hub to the same WiFi SSID network  ( link:  SSID )


    The ATX LED Hub is powered by the AL-PSE-4D or by USB-c
         

  4. Go to http://me.atxled.com, click on the setup wheel, go to admin, select Alpha version

          upgrade the ATX LED Hub   (version 667 or later)

          note do not plug in the USB adapter until the upgrade is done
  5. Connect the DMX-USB adapter

     -     https://www.amazon.com/dp/B0BW479Q5K/
  6. click on the wheel, then on WiFi-Rooms
  7. Create "Rooms" these are groups of lights,

           change the name to suit your needs
  8. Test and location the bulbs with these color controls      WiFi-Channels

  9. Review the list of bulbs - change their names as needed, delete if no longer needed

  10. Assign Bulbs to Rooms

  11. Turn lights on/off individually or from the Room
  12. Assign DMX start addresses to Rooms
  13. Connect a DMX source to the DMX-USB adapter - blue light will be ON
  14. send DMX values as follows:
DMX values

Offset
 Function
 Example: Base = 101
0
 Red
 Address= 101
1
 Green
 102
2
 Blue
 103
3
 Warm
 104
4
 Cool
 105
5
 Brightness
 106
6
 CCT
 107
7
 Future
 108
 

WizRooms



  1. View DMX values for debugging


DMX-Debug



  1. Create Schedules and Macros including WiFi Bulbs ( see ZWD features )

  2. Forward DMX controls to the DALI bus for universal  DMX/DALI/Wifi projects
  3. Forward DALI commands to WiFi Lights
  4. Forward Alexa / Google commands to WiFi Lights and DALI lights



Subject:
Re: WiZ ATX LED
From:
Murray Freeman <murray@atxled.com>
Date:
2/19/2024, 4:00 PM


Here is what you can do:

- connect your DMX source to the DMX receiver
- power the hub - do not connect the USB-DMX yet
- follow the procedure to get the hub onto your wifi network 
                      https://atxled.wiki.zoho.com/public/Changing-the-SSID.html

- log into the hub at http://me.atxled.com
- change the software from production to Alpha
- click on update software, wait for reboot, refresh
- connect the DMX receiver via USB to our hub
- visit the WiFi-Rooms tab
- assign names to each bulb,
- create rooms, name the rooms
- assign a DMX starting address to the rooms
- receive DMX

you should now be operational - your DMX console can control Wiz bulbs, as shown in the video attached

The base address can be set for each Room, overlapping is blocked.

Base     = Red   ( 0-255 )
Base+1 = Green
Base+2 = Blue
Base+3 = Warm
Base+4 = Cool
Base+5 = Brightness ( 0-255 )
Base+6 = Temperature (10-60 maps to 1000K to 6000K )

If there is no response to the color channels - check that Brightness sent ( 10 to 100 )

if Temperature is non-zero, then Temperature is used, if it is zero, then RGBWC is used




    		 RSS of this page