Demo Kit with 4 LEDs, power display and AL-PWS-DR1
|
This demo has the following parts
- 4 pcs P023R6-660mA LEDs with 6 watts each
- AL-PWS-DR1 switch / driver
- power meter to display power usage
- 2.1mm female connector
Power to the demo can be from either
- a 48v power supply with 30 watts and a 2.1mm male plug
- 48v PoE injector like the UBNT POE-48-24
- the AL-PWS-8D from ATX LED
if PoE is used, then use a copper ( not CCA) ethernet cable up to 328 ft long
The AL-PWS-DR1 is actuated as follows
- press briefly to turn on / off
- press and hold to dim up / down
- connect a ATX LED DALI controller like the AL-DALI-PI
|
Uploading ....
Would a Netgear G5305P PoE switch be able to power the kit?