Overview
The P023R lights are a set of LED lights designed specifically for low voltage operation. They do not have an integrated LED driver - this insures longer operation.
Different sizes and color temperatures are available and all of them are perfectly dimmable when used with a suitable constant current driver. The P023R series of LED fixtures are ETL listed and IC rated for direct contact with insulation – recognizing it’s cool operating temperatures and distributed heat.
Ceiling 'Puck' Lights
Size
The two sizes of puck style lights are 4" and 6". The four inch 6 watt is used for most applications but for higher brightness environments the six inch 11 watt is available.
Mounting
The puck series of lights come it two mounting styles: V-Spring and Side Spring. Both mounting options come with each light. To swap out the mounting bracket, use a screwdriver to unscrew the mounting screw swap the mount, and then replace the screw.
|
Side Spring The side spring style is designed to be used without a housing. To install the side spring drill a 4" hole in the ceiling, retract the springs and then release them in the ceiling. To remove the light simply pull the light away from the ceiling and push back the springs.
|

| V-Spring The v-spring style is designed to be used with our specifically designed low voltage hanger box. The hanger box should be installed during rough in using either the nailer or hanger bar option. Once the sheetrock is up, the light can be installed by squeezing the spring together and inserting into the corresponding openings in the hanger box. To remove the light, pull the away from the ceiling, squeeze the springs together and then remove fully. |
Vf and Equivalent Resistance
Model
| mA | Connectors
| Forward Voltage (Vf) @ 10 mA
| Vf @ max
| Equivalent Resistance
|
P023TW7 | 260mA | 1969442-3 far 1969588-3 near
| 27 | 31 | 16 ohms |
P024TW6 | 660mA
| 1 OJ606 F - in 1 OJ606 M - out
| 7.5 | 10.8 | 5 ohms |