Rough In Demo kit
This kit shows the installation of a Low Voltage lighting system in new construction


| Realistic CCT demo system
This demo has the following items
- 2 AL-WS-DR2 or 1 AL-WS-DR1
- 1 or 2 AL-WS-M or Home Depot on / off
- 1 AL-WS-USBc
- 4 locations, 4 inch - specify the number of each, total 4
- DL-120 3500K
- DL-120 30/4000K
- DL-120 27/5000K
- P023R6 - 660mA - 3000K
- P023R6 - 660mA - 3500K
- P023R6 - 660mA - 27/5000K
- P023R6 - 48v6w - 3500K
- AL-R@R - CCT or 48v
- One location #5 - E26
- 660 mA, 2700 K
- 660 mA, 4000 K
- 48v6w, 2700K
- 48v6w, 4000K
- 12 inch strip light.
- fixed 3000 or 3500K
- Tunable white 2700 to 5000K
- AL-PS-51v96w power supply
- AL-PSE-4 power distribution
- Leviton 14x 14 panel
|

| This demo has the following items
- 4 pcs AL-CBOX4 LED ceiling mount 'Can'
- 2 AL-WS-DR2
- 1 AL-WS-M
- 4 locations, 4 inch - specify the number of each, total 4
- DL-120 3500K
- DL-120 30/4000K
- DL-120 27/5000K
- P023R6 - 660mA - 3000K
- P023R6 - 660mA - 3500K
- P023R6 - 660mA - 27/5000K
- P023R6 - 48v6w - 3500K
- One location #5 - E26
- 660 mA, 2700 K
- 660 mA, 4000 K
- 48v6w, 2700K
- 48v6w, 4000K
- One location 2.75 inch, specify
- MD style gimbal ( fixed 3000 or 4000K)
- DL-98B gimbal ( fixed at 2700, 3850, 5000K or tunable)
|

| - 4 switch locations, specify for each location ( 1, 2, 3, 4)
- DALI switch configured to match LEDs
- WIFI switch to configured to match LEDs
- dumb switch ( DR1)
- PIR switch
- dumb switch ( DR0)
- AL-WS-M
- USB-C
- Power supply is
- 60 watts until the 51v96w is in stock
- then 96 watts SML
- Distribution is
- PSE48 sba until the 51v96w is in stock
- then PSE-4D sml
|
 |
Closet Switch on side?
With the simple switch in the down position - the alarm contact ( White button magnet) can be use to simulate a closet door opening and turning the lights on.
|