Overview
The P023R lights are a set of LED lights designed specifically for low voltage operation. They do not have an integrated LED driver - this insures longer operation.
Different sizes and color temperatures are available and all of them are perfectly dimmable when used with a suitable constant current driver. The P023R series of LED fixtures are ETL listed and IC rated for direct contact with insulation – recognizing it’s cool operating temperatures and distributed heat.
Recessed Ceiling 'wafer' Lights
Size
The two sizes of recessed style lights are 4" and 6". The four inch 6 watt is used for most applications but for higher brightness environments the six inch 11 watt is available.
Mounting
The recessed series of lights come it two mounting styles: V-Spring and Side Spring. Both mounting options come with each light. To swap out the mounting bracket, use a screwdriver to unscrew the mounting screw swap the mount, and then replace the screw.
| Side Spring
The side spring style is designed to be used without a housing. To install the side spring drill a 4" hole in the ceiling, retract the springs and then release them in the ceiling. To remove the light simply pull the light away from the ceiling and push back the springs.
|
| V-Spring
The v-spring style is designed to be used with our specifically designed low voltage hanger box. The hanger box should be installed during rough in using either the nailer or hanger bar option. Once the sheetrock is up, the light can be installed by squeezing the spring together and inserting into the corresponding openings in the hanger box. To remove the light, pull the away from the ceiling, squeeze the springs together and then remove fully. |
P023R6 Connectors
The connector for the single color recessed light is the OJ-606. This is plug compatible with the Ideal 30-082 connector. The wafer is delivered with the male connector attached to the LED. The female connector is wired during rough in via AWG18 or AWG20 solid wire. We recommend the solid wire, but awg 16 stranded also works.
Color Temperature
Recessed LED lights are available from many suppliers. There are single color and tunable white models. We stock in these single color LEDs. The lights can be easily swapped out if at different color is needed.
For Tunable White applications - we stock a 2700K to 4000K model and a 2700K to 5000K model. See Tunable White
Size
| Lumens
| Watts
| Color temp
| CRI
| # LEDs / Driver
|
4 inch
| 550
| 6
| 2700, 3000, 3500
3850, 5000
| 80
| 8 direct
|
4 inch
| 550
| 6
| 3500
| 90
| 8 direct
|
6 inch
| 1100
| 11
| 3000,3500
| 80
| 2 direct, 4 with doubler
|
4 inch
| 700
| 7
| 2700-5000
| 80
| 4
|
|
|
|
|
|
|
We offer 3 Edison style bulbs with screw bases.
|
ATX-A60 / A19 bulb
E26 socket
E26 base bulb with 6 watts, 600 Lumens,
A60 bulb style metric name
A19 bulb ( USA name )
Fits all typical light fixtures, runs cool and last longer
Filament style for horizontal light output
660 mA and 9 volts typical
2700K, 3500K, 4000K
|
| ATX-A60F / A19 bulb
E26 socket
E26 base bulb with 6 watts, 600 Lumens,
A60 bulb style metric name
A19 bulb ( USA name )
Fits all typical light fixtures, runs cool and last longer
Frosted style for axial light output ( overhead use)
660 mA and 9 volts typical
2700K, 3500K in stock
|
|
ATX-C35 / C11 bulb
E12 Candalabra
E12 base bulb with 6 watts, 600 Lumens,
C35 bulb style ( metric name)
C11 bulb ( USA name)
Fits all candalabra light fixtures, runs cool and last longer
660 mA and 9 volts typical
2700K, 3500K, 4000K
|
Vf and Equivalent Resistance
Model
| Forward Voltage ( Vf)
| Equivalent Resistance
|
P023R6-360mA
| 15.8
| 4 ohms
|
P023R11-360mA
| 31
| 4 ohms
|
P023R6-660mA
| 7.8
| 1.6 ohms
|
P024R6-660mA
|
|
|
E-26 A60 / A19
| 7.4 | 5 ohms
|
E-26F A60 / A19
|
|
|
E-12 C35 / C11
| 7.4
| 5 ohms
|
Uploading ....
Click here for the full P023R Data Sheet